today i've made some minor tweeks on my ccn machine.
i replaced the existing 'stiff' motor coupling with a flexible tube with clamps.
this method is used alot i've seen but i found it looking pretty cheap.
but i must agree that although it looks cheap and simple, it works better than my stiff, homemade, coupling.
with the stiff coupling the machine 'twitched' a little and now with the flexible coupling it rns verry smooth.
i also added a piece of plexi i had lying around at the back of the machine to hold back the debris from the routing process.
-> i did have to reposition the home switch...
i replaced the existing 'stiff' motor coupling with a flexible tube with clamps.
this method is used alot i've seen but i found it looking pretty cheap.
but i must agree that although it looks cheap and simple, it works better than my stiff, homemade, coupling.
with the stiff coupling the machine 'twitched' a little and now with the flexible coupling it rns verry smooth.
i also added a piece of plexi i had lying around at the back of the machine to hold back the debris from the routing process.
-> i did have to reposition the home switch...
No comments:
Post a Comment